110.00 mhz saw filter phone: +86 (10) 5820 3910 fax: +86 (10) 5820 3915 email: sales@vanlong.com web: http://www. vanlong.com ? 2006 by vanlong technology co., ltd. SF110L ? ideal for receiver in 110.00 mhz ? low-loss, coupled-resonator quartz design ? simple external impedance matching ? rugged, hermetic, low profile f-11 package ? complies with directive 2002/95/ec (rohs compliant) absolute maximum rating (ta=25 c) parameter rating unit cw rf power dissipation p +0 dbm dc voltage v dc between any two pins v dc 10 v operating temperature range t a -20 ~ +55 c storage temperature range t stg -40 ~ +85 c electronic characteristics parameter sym minimum typical maximum unit nominal frequency (at 25 c) (center frequency between 3db point) f c ns 110.00 ns mhz insertion loss il - 4.5 5.0 db user signal passband bw - 576 - khz stopband attenuation f c - 5.0 mhz f c - 3.5 mhz f c 2.0 mhz f c + 3.5 mhz f c + 5.0 mhz rel 50 45 30 40 40 - - - - - - - - - - db db db db db group delay deviation - - 0.7 - sec frequency aging absolute value during the first year |f a | - - 10 ppm/yr dc insulation resistance between any two pins - 1.0 - - m ? input / output impendance (nominal) - - 300//1.2 - ? // h ns = not specified notes: 1. the frequency f c is defined as the midpoint between the 3db frequencies. 2. unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is connected to a 50 ? test system with vswr 1.2:1. the test fixture l and c are adjusted for minimum insertion loss at the filter center frequency, f c . note that insertion loss, bandwidth, and passband shape are dependent on the impedance matching component values and quality. 3. unless noted otherwise, specifications apply over the entire specified operating temperature range. 4. the specifications of this device are based on the test circuit shown above and subject to change or obsolescence without notice. 5. all equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale. 6. our liability is only assumed for the surface acoustic wave (saw) component(s) per se, not for applications, processes and circuits implemented within components or assemblies. 7. for questions on technology, prices and delivery please contact our sales offices or email to sales@vanlong.com. SF110L
110.00 mhz saw filter phone: +86 (10) 5820 3910 fax: +86 (10) 5820 3915 email: sales@vanlong.com web: http://www. vanlong.com ? 2006 by vanlong technology co., ltd. SF110L package dimensions (f-11) marking test circuit typical frequency response electrical connections terminals connection 1 input/output 2 case ground 3 case ground 4 output/input package dimensions dimensions nom. (mm) tol. (mm) a 11.0 0.3 b 4.5 0.3 c 3.2 0.3 d 0.45 0.1 e 5.0 0.5 f 2.54 0.2 SF110L from 50 ? source to 5 0 ? load 250 ? 250 ? ink marking color: black or blue
|
